Carbonless Paper 2-Ply — 53 gsm, 713 × 864 mm
Meter readers write standing up, on a clipboard, in whatever the weather is doing. The extra three grams over a 50 gsm sheet is felt at the top edge where a set is peeled off a pad, and the 713 × 864 mm parent trims to a tall ticket that fits a jacket pocket.
Specifications
| Parameter | Specification |
|---|---|
| Plies / parts | 2 parts per set |
| Basis weight | 53 gsm per ply |
| Sheet size | 713 × 864 mm |
| Layer build | CB + CF |
| Copy colour sequence | White top / Red CF |
| Copy yield | One copy on the CF ply |
| Printing | 1–2 colour flexo, numbering |
| Finishing | Padded, 100 sets |
| Parent form | Flat sheets, guillotine trimmed |
How it runs
For a 2-part set the practical sequence is: print the 713 × 864 mm parent at 53 gsm, collate CB, CFB and CF in order, then edge-glue or pin the set. The grammage match across plies is what keeps the collation flat when it is stacked in a pile of a few thousand sets, and it is why we quote the parts as a set rather than as separate reams.
Copy colour is where the parts are told apart on the desk. The top sheet is white and carries the original; the ply underneath takes one of our standard copy colours so a clerk can sort the set without reading it. For a 2-part form we normally put a single dark image on the last ply, or a different colour per intermediate ply when the form is routed to more than one desk.
Where this specification stops
The limitation to plan around is trim: a 713 × 864 mm parent does not divide into every finished size without waste. If the finished form is unusual, say A4 with a tear-off stub, confirm the layout before ordering, because a 53 gsm sheet is quoted on the parent and the yield per parent is what drives the delivered cost.
What to send for a quotation
To quote this sheet we need the finished part size and the number of parts, the copy colour order, and whether the set is glued, pinned or fanfolded. Tell us the print colours and whether numbering is required, and we can confirm the parent and the collation in one reply.
- Finished part size and number of parts
- Copy colour order across the plies
- Print colours, numbering pattern and finishing
- Parent size you can run on your press
