Carbonless Paper 3-Ply — 47 gsm, 889 × 1194 mm
Forty-seven gsm on an 889 × 1194 mm parent gives sixteen A4 sets per sheet, which is the highest yield in this range and the reason the combination exists: for a printer whose three-part volume is large and whose paper cost is the dominant line item, the larger parent spreads the trim waste over twice as many sets as a 787 × 1092 sheet. The light ply is what makes sixteen sets practical rather than merely theoretical, because a thinner sheet cuts and collates faster.
The build is CB, CFB and CF. Face ply white; middle and bottom plies in white, yellow, red, blue or green. Register is held across the plies so a four-colour heading lands identically on all three copies.
Specifications
| Construction | CB / CFB / CF |
| Ply count | 3 ply — 3-part sets |
| Grammage | 47 gsm per ply |
| Sheet size | 889 × 1194 mm |
| Cut yield | 16 × A4 per parent sheet |
| Ply colours | Top white; middle and bottom white / yellow / red / blue / green |
| Pre-printing | 1–4 colour flexographic |
| Finishing | Numbering, perforation, glued pads, fanfold |
What the large parent changes
- High-volume invoice and statement work where the paper cost per set decides the tender.
- Continuous forms conversion, where the parent is slit into several webs rather than guillotined.
- Standard A4 business stationery for markets that price against a landed cost per thousand sets.
- Packing list and delivery documentation produced in runs of hundreds of thousands.
The trade-off is handling: a 889 × 1194 parent is a large sheet to lift, and a 47 gsm ply at that size behaves like a sail on a press infeed until the suction is set correctly. Plants that already run this parent for other papers will have no trouble; a shop moving up from 787 × 1092 should expect to reset the feeder.
Where it does not belong
Do not choose the 47 gsm ply for a form that will be filled in by hand at a counter every day — it is serviceable but it will not feel substantial, and buyers of retail pads usually prefer 55 gsm or heavier. It is also the wrong specification for laser pre-printing after collation, and for any job where the press cannot handle a parent this size. Where the run is small, the extra trim waste on a large parent offsets the yield advantage.
What to send for a quotation
Tell us the ply colour order, the finished size, whether you slit the parent into webs or guillotine it, the numbering rule and the pre-print colours. If you intend to slit, give the web widths — the 889 × 1194 sheet can be divided several ways and the cutting plan is priced from that answer.
