Carbonless Paper 4-Ply — 50 gsm, 787 × 1092 mm
This 787 × 1092 mm parent at 50 gsm per ply is the four-part customs and forwarding sheet, where the broker, the carrier, the shipper and the file each need a copy of the same declaration. The parent cuts into A4 parts with a workable margin, so the set can be produced on a standard forms press.
Specifications
| Parameter | Specification |
|---|---|
| Plies / parts | 4 parts per set |
| Basis weight | 50 gsm per ply |
| Sheet size | 787 × 1092 mm |
| Layer build | CB + 2 × CFB + CF |
| Copy yield | Three copies, two CFB plus CF |
| Sheet form | Flat sheets, cut to the parent size |
| Printing | 1–4 colour flexo, numbering and perforation on request |
| Converting | Edge glued, padded, pinned or fanfold |
How it runs
On press, the 4-part collation runs as one set: 50 gsm CB on top, 50 gsm CFB in the middle where a third, fourth or fifth part is required, and 50 gsm CF underneath. The 787 × 1092 mm parent is normally printed 1 to 4 colours by flexo, with numbering, perforation and edge gluing added in line. Because every ply in a set carries the same grammage, the collation feeds at one tension and the parts stay registered through the folder.
The 4 plies are collated in a fixed order, white on top, tinted below, and the tint is what makes a five- or four-part set usable in practice. A clerk who has to route copies to stores, accounts and the customer can pull the right sheet without checking a legend. Intermediate plies can also be printed with a routing block if the form needs one.
Where this specification stops
Do not specify this combination for a set that has to survive a wet environment. Carbonless coatings are sensitive to moisture, and a 4-part form left on a damp loading dock will cockle before the image fades. For outdoor or chilled handling, a synthetic or thermal label route is the correct answer rather than a heavier carbonless sheet.
What to send for a quotation
A quotation for this combination needs four things: the finished form size, the number of plies, the copy colour sequence, and the finishing method (edge glued, padded, pinned or fanfold). Add the print colours and any numbering pattern, and the parent size can be confirmed against your layout.
- Finished part size and number of parts
- Copy colour order across the plies
- Print colours, numbering pattern and finishing
- Parent size you can run on your press
