Leave Your Message
Carbonless paper 4-ply, 55 gsm, 610 × 915 mm, CB + 2 × CFB + CF
Loading...

Carbonless Paper 4-Ply — 55 gsm, 610 × 915 mm

4-ply 55 gsm carbonless paper on a 610 × 915 mm parent for freight forwarding files.

    Four parts at 55 gsm on 610 x 915 mm is a freight forwarder's file: booking, customs, carrier and accounts. Four plies at this weight stay a workable thickness in the pad, and the middle plies can be tinted so the customs copy is found without reading the header.

    Specifications

    Parameter Specification
    Plies / parts 4 parts per set
    Basis weight 55 gsm per ply
    Sheet size 610 × 915 mm
    Layer build CB + 2 × CFB + CF
    Copy yield Three copies, two CFB plus CF
    Colour coding Two intermediate plies, tint them separately
    Sheet form Flat sheets, cut to the parent size
    Printing 1–4 colour flexo, numbering and perforation on request
    Converting Edge glued, padded, pinned or fanfold

    How it runs

    The sheet is specified as a matched set rather than as loose reams, so the CB, CFB and CF plies in a 4-part form share the same 55 gsm base and the same 610 × 915 mm trim. That matters on a forms press: mixed bases drift out of register after a few hundred impressions. Printing is 1 to 4 colours by flexo, and consecutive or repeating numbering can be added without a second pass.

    Because the image is generated by pressure rather than by carbon, the copy colour comes from the coating on the receiving ply, not from an inserted sheet. That keeps a 4-part set to 4 plies of paper, with no loose carbon to handle or discard, and it is the reason the set can be glued into a book and torn out cleanly.

    Where this specification stops

    A 4-part set at 55 gsm is not intended for laser printing after collation. The heat and pressure of a laser fuser will develop the coating across the whole sheet, so the form has to be printed before collation or on a press that does not fuse toner through the plies.

    What to send for a quotation

    A quotation for this combination needs four things: the finished form size, the number of plies, the copy colour sequence, and the finishing method (edge glued, padded, pinned or fanfold). Add the print colours and any numbering pattern, and the parent size can be confirmed against your layout.

    • Finished part size and number of parts
    • Copy colour order across the plies
    • Print colours, numbering pattern and finishing
    • Parent size you can run on your press

    Leave Your Message