Leave Your Message
Carbonless paper 4-ply, 60 gsm, 610 × 860 mm, CB + 2 × CFB + CF
Loading...

Carbonless Paper 4-Ply — 60 gsm, 610 × 860 mm

4-ply 60 gsm carbonless paper on a 610 × 860 mm parent for four-part equipment service histories.

    A service history that stays in a machine's folder for years is what this 610 × 860 mm sheet is cut for: 60 gsm over four plies, heavy enough that the fourth copy is still readable after the set has been handled at every visit.

    Specifications

    Parameter Specification
    Plies / parts 4 parts per set
    Basis weight 60 gsm per ply
    Sheet size 610 × 860 mm
    Layer build CB + 2 × CFB + CF
    Copy colour sequence White / Yellow / Blue / Yellow
    Copy yield Three copies, two CFB plus CF
    Printing 1–3 colour flexo, perforation
    Finishing Edge glued
    Parent form Flat sheets, guillotine trimmed

    How it runs

    A forms press sees this sheet as a 4-part job on a 610 × 860 mm parent at 60 gsm per ply. The CB face takes flexo ink readily at 1 to 4 colours; the CF face is where the image appears, so it is kept unprinted unless a coloured copy is specified. Numbering, perforating and edge gluing are in-line operations, which is why the parent size has to leave a clean margin.

    Collation order follows the way the form is used. Part one is white and stays with the customer or the file, and each following ply can be given its own tint so the copies are separable at a glance. On a 4-part set this colour coding does the work that a printed footer would otherwise have to do, and it survives photocopying of the filed copy.

    Where this specification stops

    This is not the sheet for a form that will be scanned at high speed: 60 gsm is chosen for hand and impact writing, and a scanner with a hard feed roller will pick up the curl of a thin ply. If the finished set has to go through an ADF in volume, a heavier base or a flat-bed workflow is the safer route.

    What to send for a quotation

    A quotation for this combination needs four things: the finished form size, the number of plies, the copy colour sequence, and the finishing method (edge glued, padded, pinned or fanfold). Add the print colours and any numbering pattern, and the parent size can be confirmed against your layout.

    • Finished part size and number of parts
    • Copy colour order across the plies
    • Print colours, numbering pattern and finishing
    • Parent size you can run on your press

    Leave Your Message