Colour Card Sheets: Colour Range, Weight and Custom Sizes
Start from what the sheet has to survive
Buyers usually open with a colour and a weight. Neither is the deciding variable. What decides whether a colour card order works is what happens to the sheet after it leaves us: whether it goes through a printer, a die, a guillotine, a laser, a child's hands or a shrink wrapper. Each of those puts a different load on the sheet, and the same colour in two weights behaves like two different materials.
So the useful order of questions is the reverse of the usual one. What will the sheet be asked to do, then which surface and weight can do it, then which colour.
Four weight bands, four different jobs
Our colour card sits in four working bands, and they are not interchangeable steps on one ladder — each is a different tool.
The lightest band folds, creases and takes origami without cracking, and it is the only band that behaves well when a child is doing the folding. It is also the wrong choice for anything that has to stand up.
The middle band used for printing and drawing is the general-purpose one: it feeds through office printers and copiers, takes pencil and marker, and is what most people mean when they ask for coloured paper.
The card band is where greeting cards, models, posters and packaging inserts live. It holds a score, survives a fold, and has enough body to be a face rather than a liner.
The heaviest band is a laminated stock: thick, moisture-resistant and wipeable, and it is the one to reach for when the sheet is the product — a display piece, a rigid box wrap, an outdoor-ish sign that has to survive handling. It is also the band with the least give, which matters at a tight fold.
Weight is not stiffness, and neither is thickness
Three numbers get used as if they were one. Grammage is mass per area. Caliper is thickness. Stiffness is resistance to bending, and it is the only one that predicts whether a sheet will hold a shape. A dense, well-formed sheet of a given grammage can be noticeably stiffer than a bulkier one of the same grammage, because stiffness comes from fibre and formation rather than from mass.
This is why two suppliers can both quote the same weight and deliver sheets that behave nothing alike, and why a buyer who specifies only weight is buying a lottery ticket. If the requirement is structural, say so, and specify by behaviour rather than by number.

Patterned surfaces cost something
The range runs from plain through embossed textures, a translucent spiderweb pattern, a leather-like grain, glitter and metallic finishes. Each is a real product, and each closes some doors.
| Surface | Best for | What it costs you |
| Plain, uncoated | Printing, writing, cutting, folding | Nothing — this is the default |
| Embossed texture | Gift boxes, art books, covers | Fine print and small type fill in |
| Leather-like grain | Notebook covers, folders, luggage tags | Hard to glue flat; scores want a wider radius |
| Translucent spiderweb | Portfolios, layered invitation work | Light passes through, so print on it goes muddy |
| Glitter | Festive packaging, stationery | Cannot be printed on reliably; shed is a complaint risk |
| Metallic and holographic | Mirror, rainbow and pattern effects | Scanners and phone cameras struggle; creases show |
The pattern is pressed or coated onto the sheet, so it sits between the ink and the paper. A texture that looks subtle in a swatch becomes a visible grid across a large solid area, and a glitter surface will not hold a fine line at all. Ask for a printed sample on the actual surface, not on the plain version of the same colour.
Custom colour matching: what to send, and what cannot be matched
We match to a physical reference. The most reliable reference is a piece of the actual material — an offcut of the previous run, a competitor's sheet, a fabric or a plastic part whose colour has to be echoed. A Pantone number is workable and is the usual route for brand colours, but it is a recipe rather than a measurement, and the same number on a textured sheet will not read the same as on a smooth one.
A screen or a printout is not a reference. A colour specified as a hex value or a JPEG will land somewhere near and then be argued about, because every screen renders it differently and every printer profiles it differently. If colour accuracy is the reason for the order, send something physical.
One property is worth knowing before matching starts: two colours can look identical under one light and different under another. This is why a shade approved under an office lamp can look wrong in daylight, and why we ask where the finished piece will be seen. Approve the match in the light it will live in.
Sizes, grain and the cut
Sheets are cut to your size rather than sold only in standard formats, and the cutting direction is not cosmetic. Paper is stiffer along the grain, so a sheet cut so that the grain runs the short way behaves differently from one cut the long way — same paper, different product. On anything that folds, the fold must run with the grain or the crease will crack; on a display piece, the upright panel wants the stiff direction.
Tell us the grain direction if the sheet is going into a machine or a fold. It costs nothing to specify and it is very expensive to discover afterwards.
Packing, and why it decides the second order

Colour card arrives flat or it does not arrive usable. Sheets are wrapped against moisture and packed in a multi-layer carton on a pallet, and a carton that can be opened flat and stood up gets used, while one that has to be emptied onto a floor tends to get damaged. If an order contains several shades, say that they must stay separately bundled and labelled: it is a packing instruction, not a paper specification, and it is the one thing most often left out.
What to send us
Send four things and the quote gets specific fast: what the sheet has to do after it arrives, the weight band or the behaviour you need, the colour reference (physical, ideally), and the finished size. If there is a print run behind the order, mention it — the surface choice depends on the process, and it is much cheaper to change a surface before a plate is made than after.
Where to go next
This page is the overview. The specialised pages go deeper on one decision each:
