Custom Printed Thermal Paper Rolls — 57 mm & 80 mm
Pre-printed till rolls are the cheapest advertising space a retailer owns: the customer takes it home, looks at it twice, and the cost per impression is a fraction of a flyer. The catch is that printing on thermal paper is not like printing on paperboard — the ink has to sit on a surface that will later be heated, and artwork built for offset will fail on a roll. This page covers what actually determines whether a printed roll works.
What survives on thermal paper
Thermal paper has a coated, slightly sealed surface. Heavy solid ink coverage sits on top of that coating, and where the print head later passes, the ink can interfere with colour development — the logo area prints weakly or the barcode beside it stops scanning. The practical rules:
- Keep coverage light in the print-head path. Logos and text near the leading edge or across the receipt body are the two areas to watch.
- Avoid large solid blocks and heavy reverses. Fine line work, single-colour logos and small QR codes reproduce reliably; a full-bleed photographic background does not.
- Do not print over the barcode zone. Promotions and barcodes should not share the same band.
- Spot colour, not process colour, for brand marks. A two-colour logo reads cleaner than a four-colour build of the same logo at till-roll width.
Artwork we need from you
Send vector artwork (AI, EPS, PDF with outlined text) at final size, with the repeat length marked, plus the safe margin on both edges. If you only have a JPEG of the logo, we will trace it — but expect a proof cycle before the run. Anything that has to be exact, such as a tax registration number, a QR destination or a return policy line, should be supplied as text rather than baked into an image, so it can be set and checked rather than approximated.
How the printing is done
We print on the roll, in line with slitting, in up to eight colours. That has one important consequence for buyers: printing is not a separate later process with its own minimum, so a distributor can order branded and plain rolls in the same shipment and the plain rolls do not carry a printing surcharge.
The sequence is: artwork check → plate/cylinder preparation → proof on the actual paper stock → your sign-off → production run → slitting and packing. The proof step is the one not to skip; a logo that looks correct on screen can sit two millimetres off the edge once the roll is cut.
Packaging is part of the product
For distributors, the carton is what the end customer sees first. We can print the carton, use neutral packaging so you can brand it yourself, or ship bulk cartons for repacking. Roll count per carton (50, 100, 120) and pallet configuration are set at order stage — changing them later means re-running the packing line, not just relabelling.
Where printed rolls go wrong
| Logo fades after a few weeks on the shelf | Ink system not matched to a coated thermal surface — specify the grade at enquiry, not after the run |
| Barcode stops scanning near the logo | Print coverage overlapping the barcode band; move the artwork, not the barcode |
| Print drifts across the roll | Repeat length in the artwork does not match the cut length; supply the repeat, not just the design |
| Front and back do not line up | Two-sided printing specified without a registration check at proof stage |
FAQ
What is the smallest print run?
It depends on colour count and roll size rather than a fixed number — tell us the design and the roll specification and we will quote a quantity that makes the plate cost sensible.
Can you print different artwork on the same order?
Yes, as separate lines within one shipment — useful for chains running regional promotions or multiple store brands.
Do you print on both sides?
Single-side printing is standard. Two-sided printing is possible on larger formats; it needs a registration check at proof stage because the second side is printed against a moving web.
Who owns the artwork?
You do. We keep the plates and files for reorders only, and do not reuse your artwork for any other customer.
