Leave Your Message
Label stock jumbo roll 1,300 mm, Kraft Paper, water-based acrylic adhesive, yellow glassine
Loading...

Label Stock Jumbo Roll 1,300 mm — Kraft, Water-Based Acrylic

Kraft Paper with water-based acrylic adhesive on yellow glassine, 1,300 mm jumbo, for brown cartons and paper sacks labelled by hand or semi-automatically.

    Kraft face on water-based acrylic over a yellow liner, at 1,300 mm: the economy route for brown board and paper sacks. Kraft disappears against a carton, and water-based adhesive is the lower-cost choice where labels go on by hand or on a moderate-speed line.

    Specifications

    Parameter Specification
    Face stock Kraft Paper
    Adhesive Water-Based Acrylic, permanent
    Liner Yellow glassine
    Jumbo width 1,300 mm
    Roll length 1,000–6,000 m
    Core 3" (76 mm)
    Service class economy general purpose
    Liner colour coding Yellow
    Typical use brown cartons and paper sacks labelled by hand or semi-automatically

    How it runs

    Each layer has a job: Kraft Paper for print and handling, water-based acrylic for the substrate, yellow glassine for release and web support. Supplied at 1,300 mm in jumbo form, the laminate is designed to be printed, die-cut and slit in one pass, with the liner staying flat through the die station.

    Because the jumbo is 1,300 mm wide, the slitting plan decides the delivered economics: the lanes are set to the customer's finished label width and the remainder is planned. The yellow glassine is the standard liner for this face stock, and the water-based acrylic adhesive is selected for the substrate the label will actually meet.

    Jumbos are wound with the liner out and wrapped for transport. The liner is what carries the web through the press, so a reel that has been stored on its side or in damp conditions will show edge damage before it shows a print problem. Store upright, cool and dry, and let the reel acclimatise before running.

    Where this specification stops

    A 1,300 mm jumbo is a converter format, not a finished label roll: it has to be printed, die-cut and slit before it can be applied. If the requirement is finished labels on a small roll, this is the wrong purchase unit, and the specification should be a converted roll rather than a jumbo.

    What to send for a quotation

    Send the finished label dimensions, the application substrate, and whether the labels will be applied by hand or on an automatic line. With the width and roll length, we can confirm whether water-based acrylic is the right adhesive family for your surface.

    • Finished label size and lane plan
    • Substrate the label will be applied to
    • Liner colour and roll length
    • Hand application or automatic line

    Leave Your Message