Leave Your Message
Direct thermal label stock jumbo roll 1530 mm wide with yellow glassine liner
Loading...
yellow_glassine_warehouse_rolls_1x1_1024kb.jpg
Loading...
yellow_glassine_jumbo_roll_hero_1024kb.jpg
Loading...
yellow_glassine_slitter_hero_1024kb.jpg
Loading...

Label Stock Jumbo Roll 1,530 mm — Direct Thermal, Hot-Melt

Self-adhesive label stock, 1,530 mm full converter width, 70 gsm direct thermal face, hot-melt adhesive, yellow glassine liner — high-volume logistics labels.

    Direct thermal face at 70 gsm on the full 1,530 mm converter width is the widest thermal label construction here, and it is built for the converters who supply logistics and retail labelling at volume. The face images under a thermal print head without ribbon or ink, the hot-melt adhesive bonds on contact for high-speed application, and the yellow glassine liner marks the construction so a thermal roll is never loaded where a standard permanent roll belongs.

    At 1,530 mm the parent is at the maximum width this range offers, which means the slitting plan determines the value of the roll entirely.

    Specifications

    Face stock Direct thermal paper, 70 gsm
    Adhesive Hot-melt
    Liner Yellow silicone glassine
    Roll width 1,530 mm — maximum width in this range
    Roll length 1,000–6,000 m
    Core 3″ (76 mm) or to customer specification
    Printing Direct thermal imaging; no ribbon required
    Finishing Slitting, die-cutting, high-speed automatic labelling

    Where a 1,530 mm thermal parent is bought

    • Logistics and shipping labels produced in high volume on wide-web presses.
    • Retail shelf and price labels that are imaged at the point of use.
    • Converters cutting many finished lanes from one unwind to keep trim loss down.
    • Lines where hot-melt's immediate bond allows faster application than acrylic.

    Seventy gsm is the heavier of the two standard thermal face weights, and it is specified where the printed label has to stay legible through handling rather than for a single scan at a till.

    Where it does not belong

    A paper thermal face is the wrong material for a wet, oily or solvent-exposed environment — a top-coated thermal film exists for that, and no liner or adhesive choice compensates for a paper face. Hot-melt adhesive is also unsuitable for cold application. And at 1,530 mm this parent needs wide-web equipment; a converter running a 306 or 509 mm line should buy a narrower parent rather than force this one through.

    What to send for a quotation

    Send the lane plan across 1,530 mm with the trim you will accept, the finished roll widths and lengths, the core size, and the application conditions — dry or damp, ambient or cold. If the labels will meet water or chemicals, tell us and we will quote a film construction instead.

    Leave Your Message