Leave Your Message
Label stock jumbo roll 762 mm, Woodfree Offset Paper, water-based acrylic adhesive, blue glassine
Loading...

Label Stock Jumbo Roll 762 mm — Woodfree Offset, Water-Based

Woodfree Offset Paper with water-based acrylic adhesive on blue glassine, 762 mm jumbo, for variable-data and office label printing.

    Woodfree offset face stock, water-based acrylic adhesive, 762 mm wide: this is the printable label stock for variable-data work on laser and inkjet equipment. The uncoated face takes toner and ink without the mottle that a coated sheet can show at low print weights.

    Specifications

    Parameter Specification
    Face stock Woodfree Offset Paper
    Adhesive Water-Based Acrylic, permanent
    Liner Blue glassine
    Jumbo width 762 mm
    Roll length 1,000–6,000 m
    Core 3" (76 mm)
    Service class standard ambient
    Typical use variable-data and office label printing

    How it runs

    This is a laminate, not a single sheet: Woodfree Offset Paper on top, water-based acrylic underneath, blue glassine as the carrier. The 762 mm jumbo width is chosen so the converter can impose several label lanes across the web. Liner release is set for the die-cutting stage, so the web does not lift or tunnel as it comes off the press.

    Application conditions drive the specification more than the print does. Woodfree Offset Paper is chosen for the printed result, water-based acrylic for the bond on the substrate, and the blue glassine for release consistency. This grade sits in the standard ambient class, which is the right fit for variable-data and office label printing rather than for chilled or wet surfaces.

    Each jumbo is wrapped and marked with face stock, adhesive, liner and width. Because the liner carries the web tension, storage matters: a reel stored upright in a dry area releases consistently, while one that has taken up moisture will tunnel at the die station. Acclimatise before running.

    Where this specification stops

    Do not specify this stock for a chilled or frozen application. The adhesive is set for ordinary ambient conditions, and a label applied to a cold, condensing surface will lift at the edge even if it looks secure at the time. For cold chain work a freezer-grade adhesive is the correct specification.

    What to send for a quotation

    Four details drive the quotation: face stock, adhesive, liner and jumbo width. Add the finished label size and the substrate, and we will confirm the slitting plan and whether this construction is suitable or whether a film face stock is needed.

    • Finished label size and lane plan
    • Substrate the label will be applied to
    • Liner colour and roll length
    • Hand application or automatic line

    Leave Your Message