Thermal Paper Jumbo Roll 560 mm — 48 gsm, 12,000 m
Five hundred and sixty millimetres at 48 gsm, 12,000 m to the reel, is a mid-width parent for kiosk and ATM paper where the finished roll is wider than a till roll. The light web prints fast and stays flat through a kiosk feed path.
Specifications
| Parameter | Specification |
|---|---|
| Grammage | 48 gsm |
| Roll width | 560 mm |
| Roll length | 12,000 m |
| Core | 3" (76 mm), custom on request |
| Coating | Top-coated direct thermal, BPA/BPS free |
| Image life | 5–10 years |
| Slitting plan | Slit to POS widths or to 210–480 mm mid-web |
| Converting fit | mid-width parent for kiosk and ATM stock |
| Shelf life | 2 years in cool, dry storage |
How it runs
Coating weight and base weight are matched: a 48 gsm base carries enough coating to image densely without the speckle that appears when a light base is over-coated. The sheet is BPA and BPS free, prints without ribbon or ink, and gives a five to ten year image life when it is stored away from heat and direct light.
Slitting a 560 mm parent at 12,000 m is the step that decides the yield: the lanes are set to the customer's finished widths, and the remainder is planned rather than left over. Cores are 3 inch as standard, custom on request. Pre-print of up to eight colours happens before slitting so register is set once for all lanes.
The reel is delivered wrapped with the grade, width, length and core marked on the label. Thermal paper is sensitive to heat and light even before it is printed, so the wrapper should stay on until the reel is on the machine. Two years is the working shelf life under cool, dry storage.
Where this specification stops
A 48 gsm thermal sheet is the wrong choice for a application that needs an opaque, write-on surface: ballpoint and stamp ink do not bond well to the coating. If the document has to be signed or stamped, a carbonless form or a woodfree label is the better route.
What to send for a quotation
Send the finished widths, the core, the roll length you can handle on the slitter and any pre-print requirement. With the printer model and the storage conditions the rolls will see, the grade and coating can be confirmed rather than guessed.
- Finished slit widths and the slitting plan
- Core size your unwinder takes
- Printer family and energy setting
- Pre-print colours, if any
