Thermal Paper Jumbo Roll 560 mm — 70 gsm, 6,000 m
560 mm is seven 80 mm lanes with nothing left over, and that single fact explains why this width is ordered so often by converters whose main product is a standard till roll. Add 70 gsm and the parent becomes a heavy-duty one: seven lanes of dense, dark-printing 80 mm paper, 6,000 m on the roll.
Seven lanes, no trim, heavier sheet
The combination is unusual and useful. Most seven-lane 80 mm programmes run 48 or 55 gsm because that is what the finished market expects; buyers move to 70 gsm when their customers complain about faint printing, jams on worn printers, or receipts that curl at the till. At 560 mm the slit plan stays perfectly clean while the sheet gets heavier — you do not trade yield for image quality.
Specifications
| Grammage | 70 gsm |
| Roll width | 560 mm — seven 80 mm lanes, no trim |
| Roll length | 6,000 m per roll |
| Core | 3 inch (76 mm) |
| Coating | BPA-free / BPS-free thermal |
| Image | Deep black, sharp barcode reproduction |
| Stiffness | High — suits long paper paths and worn platens |
| Finishing | Slit to 80 mm; pre-printing up to 8 colours |
Applications
- Heavy-duty 80 mm till rolls for high-traffic retail and hospitality sites.
- Receipts that double as records and are filed rather than discarded.
- Printers with long paper paths, where a light sheet jams.
- Any 80 mm programme where the customer has asked for darker print.
What to check before you switch
Moving a site from 55 gsm to 70 gsm changes more than the print density. The finished roll is shorter for the same diameter, so a till that changed rolls once a day will change them more often — calculate that before quoting, because it is the complaint that follows a weight increase. The heavier sheet can also overwhelm a low-cost printer's feed mechanism; check the media range of the specific model.
Six thousand metres per parent means more frequent parent changes on the slitter than a 12,000 m roll. On a line that already runs 70 gsm this is normal; on a line moving up from 48 gsm it is a scheduling change.
Ordering
Send the finished width, the printer models, the roll diameter your customer's machine accepts and whether pre-printing is needed. We will confirm the seven-lane slit plan and the finished roll count per parent before production.
