Thermal Paper Jumbo Roll 784 mm — 55 gsm, 12,000 m
784 mm looks like an odd number until you divide it. It is 4 × 196 mm, 7 × 112 mm, 8 × 98 mm and 14 × 56 mm — a width chosen by converters whose slit plan does not fit the round numbers. Buyers who order 790 mm and throw away the remainder every shift are paying for a parent that was designed for someone else's product mix. This roll is 784 mm wide at 55 gsm, 12,000 m.
Why thermal parents come in near-neighbour widths
The range includes 784, 790 and 795 mm because slitting layouts differ by a few millimetres and a few millimetres decide whether a lane fits. A converter running 98 mm lanes gets eight across 784 mm with nothing left; the same job on 790 mm leaves 6 mm of trim that has to be slit off and discarded. Over a year of production, that is not a rounding error.
Specifications
| Grammage | 55 gsm |
| Roll width | 784 mm — 8 × 98 mm, 7 × 112 mm, 14 × 56 mm |
| Roll length | 12,000 m per roll |
| Core | 3 inch (76 mm) |
| Coating | BPA-free / BPS-free thermal |
| Image | Black, sharp barcode and QR reproduction |
| Image life | 5–10 years under normal storage |
| Finishing | Slitting to finished width; pre-printing up to 8 colours |
The general-purpose weight
Fifty-five gsm is the middle of the thermal range and the weight most converters settle on when a parent has to serve several finished products. It prints darker than 48 gsm at the same energy setting, feeds more reliably in printers that were not designed for thin paper, and still keeps a 12,000 m roll to a manageable diameter. If you are unsure which weight to start with, start here.
Applications
- POS and receipt rolls in the 56–112 mm band.
- ATM and kiosk rolls where image durability matters more than cost per metre.
- Logistics and warehouse printing where the receipt doubles as a document.
- Multi-width programmes where one parent has to feed several slitting layouts.
Limits
If your finished width is 80 mm exactly, this parent gives nine lanes with 64 mm left over — a poor fit. In that case the 400 mm or 560 mm parents are the efficient buy, and ordering 784 mm would add cost without adding output. Slit arithmetic should decide the parent, not availability.
Fifty-five gsm is also not a heavy-duty grade. It is not intended for applications where the printed image is exposed to abrasion or to prolonged contact with oils and solvents; for those, a top-coated thermal film label is the correct material rather than a heavier paper.
Ordering
Send the finished widths and the number of lanes you want, the core size, the roll length and whether pre-printing is required. We will check the slit plan against 784 mm and confirm the winding direction before production.
